Looks like a book, but isn’t

Members of my family (OK, one particular member), like to give me gifts adorned with books. That’s why I have, at last count,

– a tea towel printed with an illustration of the library of Trinity College, Dublin. in the style of the Book of Kells
– a greeting card made to look like the 1861 edition of Mrs. Beeton’s Everyday Cookery (part of this set from the Bodleian library)
– a Christmas bookshelf advent calendar, also from the Bodleian
– a padded cosy for my Bodum coffee maker, made out of fabric printed with books and bookshelves
– and, perhaps the best of the collection, a set of stickers that make my 3-ring binders look like a shelf of old books, similar to this set from the University Library of Salzburg

I am a lucky librarian!

I was delighted to discover, upon moving to Madison, the existence of Grimm’s Bindery, a book-bindery that has been in operation in Madison since the 1850s. One of these days, I’ll get around to paying them a visit. And I might just add to my collection of objects that look like books with one of their book safes, blank notebooks that look like library-bound books, or a leather iPad cover (not that I have an iPad). Alas, I have no use for a personalized hollowed-out book in which to hide an engagement ring.

But none of these bookish objects can compare with my latest discovery! Did you know that the parking garage of the Kansas City (Missouri) central public library looks like a giant bookshelf?

Central Library Parking Garage


(more photos on the library’s Flickr stream, here)

Loading EPUBs (including converted PDFs) onto your e-reader using Calibre

[this post is a follow-up to my post about converting PDFs to an e-reader friendly format using Calibre ebook management software]

Once you’ve got all your ebooks organized, with PDFs converted to the EPUB format, the next step is to load them onto your e-reader. I actually found this a bit confusing the first time I did it (it’s not actually hard – I just couldn’t figure out where to click when!), so I took some screenshots for you.

The first step is to plug in your e-reader. Check to make sure that it is loaded properly: my Kobo Touch shows up as an external drive in Finder when it’s properly loaded, looking like a USB drive, iPod or other external device.

It might take a few seconds for Calibre to recognize your device. When it does, it will let you know:

Screen Shot 2012-06-09 at 2.54.50 PM

(This notice will disappear quite quickly after it pops up, which I find a little frustrating). Once your device is loaded, you will see a “send to device” button in the top toolbar:

Screen Shot 2012-06-09 at 2.55.05 PM

Select the files you wish to send to your device, and click “Send to Device.” It will take a few seconds for the material to be loaded.

To check that your files are properly loaded, you can click on “Device” (next to “Library”) in the top toolbar, and you can view all the files on your e-reader:

Screen Shot 2012-06-09 at 2.55.53 PM

Unplug your e-reader and get reading!

Also, as this screenshot shows, it’s possible to convert PDF knitting patterns as well, although I’ve found that the results are somewhat more hit-and-miss than with articles and books, probably because designers (rightfully) add more white space and special formatting to PDF knitting patterns to facilitate readability. When the conversion does work, though, it can save you from lots of squinting at instructions:

Screen Shot 2012-06-09 at 2.57.32 PM

I hope these instructions are helpful! Although I originally conceived this little tutorial idea when I received a free PDF advance copy of Bowling Avenue, which is now available in non-PDF format for Kindle, Nook, and good old-fashioned paper, I realized that it might be useful and interesting for readers who are more generally interested in cleaning up and organizing their PDFs. I’ve certainly found it a godsend for storing and reading academic articles on the go.

If you like reading news on your ereader, you might also want to check out this article on ProfHacker about Calibre’s “News” feature as well.

Convert PDFs to a more pleasing format for your ereader using Calibre

(before getting to the meat of this post, can I just say that ebook readers need to be shipped with at least two extra charging cords? Or, better yet, may I suggest that someone should invent, if they haven’t already, just one cord  that would charge my laptop, my iPod, my cellphone, if I had one, and my ereader? In any case, apologies that my posts on Bowling Avenue, by Ann Shayne are so egregiously behind schedule. and now, on to our regular tech-nerd-lite programming)

Way back at the beginning of May, David Pogue of the New York Times made an offhand remark in a column about the new Sony e-reader stating that the problem with e-readers today lies in the incompatibility of formats, which means that you are limited to reading only Nook-formatted books on your Nook, Kindle-formatted books on your Kindle, etc. If you want to know more about whether this is, or is not, true, I’ll direct you to Pogue’s follow-up article, linked above. (short version: it’s true with commercial e-books that have embedded Digital Rights Management technology, which is most of them).

It is, however, possible, and fairly easy, to convert PDFs to the more ebook-friendly EPUB format, and then read them happily on your ereader, with the ability to manipulate font-size, add virtual post-its, mark your place (I don’t know about other e-readers, but when you bookmark a page on your Kobo touch, it folds down the corner little piece of virtual paper, leaving a triangular dog-ear, which I find very pleasing), and all the other things that e-reading allows.

Why would I want to convert PDFs to EPUB format? Well, in my case:

    • scholarly articles are widely available as PDFs, and I have to  choose to read many many articles in order to choose the ones I want my students to read, but PDFs are very unpleasing to read on my Kobo, and printing out 50 articles is a pain and a waste of paper, and since I like to read on campus/in coffee shops, I’d have to lug around a big binder everywhere, because I am too scatterbrained to manage individual articles without losing random sections of them everywhere. The ereader makes my life easier,* and, I hope, my course readings better.
    • and, secondarily but not unimportantly, I have in my inbox a 267-page PDF “Freeola” copy of this summer’s most highly anticipated Nashville-based real estate flooding-related chronicle of human drama, complete with knitting subplot and artisanal letterpress cover design and I’d like to be able to read in on my e-reader without printing it out.

Important note: This book is now for sale in several pleasing non-PDF versions, including Kindle, Nook book, and print-on-demand paperback here , so this process won’t actually be necessary to read it, but this tool is so handy for those who deal with a lot of PDFs that I thought I’d use Bowling Avenue as a good example to demonstrate it! Thanks again to Ann Shayne for sending me the freeola PDF.

So, to convert all those PDFs on my reading list into the EPUBformat, and load them onto my Kobo, I use
Calibre, an ebook management software that’s free to download for both Macs and PCs. I find it a lot more useful and easy-to-use than either the software provided by Kobo, or Adobe Digital Editions.

Once you’ve downloaded and installed Calibre (shown here on Mac OS Lion), you will be prompted to choose which type of e-reader you are using:

Screen Shot 2012-06-09 at 2.21.29 PM

This is really all the set-up that’s required, and then you can get on with organizing your ebooks, including converting PDFs, adding tags and other metadata, and loading them onto your ereader.

To convert PDFs, first click on the “Convert Books” button in the toolbar:

Screen Shot 2012-06-09 at 2.55.05 PM

Choose the PDF file from the folder where you saved it (your desktop, downloads folder, etc.):

Screen Shot 2012-06-09 at 2.26.42 PM

and then check to make sure that the “Input format” is set to PDF and the “Output format” is set to EPUB. You can add tags and fix the author and title information before you convert the file as well (Note: this is not actually the cover of Bowling Avenue: it’s a dummy cover that I added to the book by mistake)

Screen Shot 2012-06-09 at 2.29.48 PM

Press OK to start the conversion process, and wait for the “Jobs” status doohickey in the bottom corner to indicate that the processing is complete:

Screen Shot 2012-06-09 at 2.30.02 PM

The first time I did this with the Bowling Avenue file, the word-wrapping in the EPUB version was not correct, so I decided to try out the “Heuristic Processing” option offered by Calibre. Basically, what this function does is try and guess what the perfect formatting for your PDF will be in order to make it most easy-to-read and nice-looking in the EPUB version:

Screen Shot 2012-06-09 at 2.34.03 PM

This worked very well, leaving only a few minor formatting flubs in the final version. You can check how your EPUB will look on your e-reader by opening the file in the Calibre e-book viewer:

Screen Shot 2012-06-09 at 2.37.10 PM

In the next post, loading your converted PDF-to-EPUB file onto your ereader. . .

* It’s important to note that if you are using this process to convert articles in PDF format, it will not work well (or not work at all) with PDF scans of older journals, because, for want of a more elegant explanation, these scans behave more like photos than like textual files. I haven’t made an extensive study of why some articles work and some don’t, and the process isn’t hard or particularly time-consuming, so you might as well try it out and see what happens.